Loggerhead Coatings

Supershell All-Purpose 250G Cartridge

$37.99 USD
$37.99 USD
Sale Sold out
View full details

Features and Benefits

APPROXIMATE COVERAGE - 8 sq.ft. at 10mils thickness.

SINGLE APPLICATION - 250g of a 2 component industrial strength epoxy system dispensed through a standard caulking gun. NO MIXING required and NO MESS to clean up!

100% SOLIDS, NO VOCs - With no water or solvents that evaporate while curing, Supershell retains 100% of its thickness and body after cure. This allows for better, more reliable coverage and a thickness integrity that is un-compromised. There are also no harmful organic vapors (VOCs) like you experience with urethane products making the application of Supershell safe, easy and enjoyable.

CHEMICAL and CORROSION RESISTANT - Supershell provides a new, permanent surface which is resistant to chemicals and corrosion. It prevents the substrate from further exposure to moisture thus mitigating further corrosion as well as creating a barrier unaffected by a wide variety of chemicals.

CURES UNDERWATER - Supershell is ideal for sealing and coating projects exposed to water immersion minimizing potential downtime and system preparation.

WORKS ON A VARIETY OF SURFACES - Works on metal, fiberglass, stainless steel, concrete and wood surfaces.

SUPERSHELL IS IDEAL FOR - Condenser and Drain Pans, HVAC Coatings, Swamp Coolers, Cooling Tower Repair, Tank Linings, Leak Repair, Collection Systems and MUCH MORE!

PLEASE NOTE:  DUE TO THE COMBINATION OF HARDENER AND RESIN PRESENT IN A SINGLE CONTAINER, THE CARTRIDGE COMES ABOUT 1/3 FULL OF PRODUCT.  THIS IS ACCURATE TO ENSUER PROPER MIXING.  THEORETICAL COVERAGE REMAINS AT APPROX. 8 sq.ft at 10mils thickness.

Instructions

1. Unscrew the cap on the top of the cartridge and set aside. Remove the sealant plug (will snap off with a little bit of pressure).

2. Attach the mixing nozzle to the end of the cartridge. Place the cap over the mixing nozzle and screw back on the cartridge. 

3. Place cartridge into a standard caulking gun and gently squeeze the lever until a small amount of tension is established in the cartridge. 

4. Place nozzle tip over the pan and slowly start to squeeze the caulking gun trigger until the pre-mixing nozzle starts to fill with the epoxy. 

5. Apply Supershell over the damaged area of the pan and spread evenly using a spreading tool or paint brush (please note that any paint brush used will need to be thrown away).

Loggerhead Supershell All-Purpose Cartridge gives you all the benefits of an industrial strength 2-part epoxy in a SINGLE DISPENSE APPLICATION. The cartridge fits in all standard caulking guns and comes with a mixing nozzle that allows the hardener and resin to be combined by prior to hitting the substrate. No need for messy prep…..insert the cartridge in a caulking gun and squeeze. YOU ARE DONE!